Metal Scroller $460 Aust.
Price includes GST for Australian customers.
Overseas customer price - $390
The metal scroller makes metal scrolls from 3mm to 12mm flat, round or square depending on the scrolling head used. The metal scroll is a genuine metal scroll in that it increases in diameter as it is made rather than the fixed diameter scrolls as made by pipe jigs.

NOW AVAILABLE----16mm SCROLLER
The basic metal scroller comes with either a 3mm fixed or 6mm adjustable head. The standard head takes metal to 25mm wide in various thicknesses up to 12mm. However heads can be individually made to take metal up to 50mm wide. (Please enquire)

 
Metal Roller $995 Aust
Price includes GST for Australian customers.
Overseas customer price - $904
The metal roller is for rolling solid metal bars into metal rings, curves, circles etc. It has twin driven bottom rollers with a hydraulically operated top roller that comes down to put in the degree of curve required in the metal.

The metal roller and shafts are hardened to withstand continuous use and to prevent serious grooving. The metal rollers are 50mm wide and can roll continuous spirals of light metal.


It is rated to 12mm round or square but is capable of rolling heavier metal if done in stages. 40 x 8mm can be rolled successfully and also square or round metal tube can be gently rolled until it starts to flatten.                                   

Metal Twister $455 or $695 Aust.
Price includes GST for Australian customers.
Overseas customer price - $415 or $630
The metal twister is designed to twist square metal bar for use in wrought iron work, security grills, balustrades etc.
THE METAL TWISTER COMES IN TWO VERSIONS:
- as part of the stand alone bar system ($695) along the side of the horizontal bar
-as a bench mounted unit ($455) that bolts to a workbench
.
Both systems operate horizontally which enables you to twist long pieces of square
metal bar up to 6 metres long or you can put a twist in the middle of a piece of metal
bar by leaving some protruding out each end.

The head/handle end consists of either a cross or circle handle with a hardened centre
slot into which the square bar is placed. 12mm square fits straight in and there are
hardened packers for 10 or 6mm square. The saddle has 3 fixed holes for 6, 10, &
12mm square metal bar with hardened holding pin for quick and easy placement and
removal. 
Exelmetal factory located at
Unit 6, 9 Villiers Drive,
Currumbin Waters, Queensland 4223, Australia
Phone (07) 55984991         Fax (07) 55982765         Email: exelmetal@metalace.com.au

Metal Ace Home Page
Want to print this page?
CLICK HERE FIRST